Gun Drill Chip Deflectors

	Flexible abrasion resistant plastic seal bonded to a hardened steel insert.
	Keeps all metal chips and high pressure gundrill oil contained inside chip box.
	Increases life of any gundrill support bushing.
	Prevents bearing contamination.

gun drill chip deflector for gun drill machine gundrill gundrill machine

webcdd1.gif (5034 bytes)

Part#	Gundrill Diameter	Part#	Gundrill Diameter	Part#	Gundrill Diameter	Part#	Gundrill Diameter
070	.0700-.0831	195	.2100-.2149	370	.3880-.3929	720	.7400-.7599
075	.0832-.0882	200	.2150-.2199	375	.3930-.4029	740	.7600-.7799
080	.0883-0933	205	.2200-.2249	385	.4030-.4179	760	.7800-.7999
085	.0934-.0984	210	.2250-.2299	400	.4180-.4279	780	.8000-.8199
090	.0985-.1035	215	.2300-.2349	410	.4280-.4329	800	.8200-.8399
095	.1036-.1086	220	.2350-.2399	415	.4330-.4379	820	.8400-.8799
100	.1087-.1137	225	.2400-.2449	420	.4380-.4479	840	.8600-.8999
105	.1138-.1188	230	.2450-.2499	430	.4480-.4629	860	.8800-.8999
110	.1189-.1239	235	.2500-.2549	445	.4630-.4779	880	.9000-.9199
115	.1240-.1295	240	.2555-.2599	460	.4780-4949	900	.9200-.9399
120	.1296-.1350	245	.2600-.2649	475	.4950-.5099	920	.9400-.9599
125	.1351-.1405	250	.2650-.2695	490	.5100-.5249	940	.9600-.9799
130	.1406-.1458	255	.2700-.2799	505	.5250-.5399	960	.9800-1.0049
135	.1459-.1510	265	.2800-.2899	520	.5400-.5549	980	1.0050-1.0449
140	.1511-.1561	275	.2900-.2949	535	.5550-.5649	1020	1.0450-1.1049
145	.1562-.1614	280	.2950-.2999	545	.5650-.5799	1080	1.1050-1.1749
150	.1615-.1666	285	.3000-.3099	560	.5800-.5899	1150	1.1750-1.2199
155	.1667-.1718	295	.3100-.3199	570	.5900-.5999	1195	1.2200-1.2749
160	.1719-.1771	305	.3200-.3299	580	.6000-.6199	1250	1.2750-1.3449
165	.1772-.1823	315	.3300-.3399	600	.6200-.6399	1320	1.3450-1.4799
170	.1824-.1874	325	.3400-.3499	620	.6400-.6599	1455	1.4800-1.5849
175	.1875-.1949	335	.3500-.3599	640	.6600-.6799	1560	1.5850-1.7049
180	.1950-.1999	345	.3600-.3699	660	.6800-.6999	1680	1.7050-1.8449
185	.2000-.2049	355	.3700-.3779	680	.7000-.7199	1820	1.8450-1.9649
190	.2050-2099	365	.3800-.3929	700	.7200-.7399	1940	1.9650-2.0000

Pricing

Part 070-110		$4.50	10% off 100 or more of any one size.

Part 115-235		$4.00	10% off 100 or more of any one size.

Part 240-355		$5.00	10% off 100 or more of any one size.

Part 365-600		$6.00	10% off 100 or more of any one size.

Part 620-720		$7.00	10% off 100 or more of any one size.

Part 740-1195		$8.00	10% off 100 or more of any one size.

		       Part 1250-1560      $10.00       10% off 100 or more of any one size.

       		       Part 1680-1940      $12.00	10% off 100 or more of any one size.

Fill out the following form to receive free samples, literature, or quotation

            Name: 
        Position: 
         Company: 
  Street Address:    
            City: 
   State/Province:
         Country: 
 Zip/Postal Code: 
       Telephone: 
             Fax: 
          E-Mail:

                    Check here for brochures only
Drill Diameter or part# for free Chip Deflector: 
   Drill Diameter or part# for free Drill Guide:

Technical Notes:

Chip Deflectors should be sized to fit the steel body of the drill to which the carbide head is brazed to. The above chart was created based on American gun drill manufacturing standards. These standards are not absolute; smaller drill manufacturers may not use as many different sizes of tube, a gun drill manufacturer may be out of the specified steel tube size and substitute another. In the event that your Chip Deflector does not fit the gun drill properly, measure the diameter of the steel tube and select the Chip Deflector that is closest to the tube diameter but smaller. The part number of each Chip Deflector is the part I.D.

The Chip Deflector is designed to be placed on the drill inside the chip box with the metal insert facing the stream of coolant and chips.

Chip Deflectors can be used in front of any flexible support bushing in a the chip box of a gundrill machine. It will seal off the bushing from direct high pressure coolant and metal chips. This in turn greatly extends the life of the support bushing and can greatly reduce bearing contamination and failure.

gun drill gundrill gun drill gundrill gun drill gundrill

Hit Counter